The obtained gold film porosities are also consistent with the porosity of the NAA film (P 2 = 55.3% for t PW = 0 min and P 2 = 59.5% for t PW = 18 min), bigger for the bigger NAA film porosity. This result is in good agreement

with previous works [27] where a 10-nm-thickness gold layer is sputtered onto NAA. Cross-sectional FE-SEM pictures in this work show that sputtered gold does not penetrate into the NAA pores and forms a superficial film. With just these two parameters (thickness this website and porosity), it is possible to account for all the features observed in the spectra in the near-IR range: the narrow asymmetric valleys for the low-porosity NAA that become more symmetric as the porosity increases and the differences in blue shift of the reflectance minima. Conclusions In this work, we have shown the effect on the reflectance spectra of nanoporous anodic alumina films of the sputtering of a gold overlayer, as a function of

the NAA porosity and of the gold thickness. The results show that the gold overlayer improves SBE-��-CD datasheet dramatically the contrast of the oscillations in the reflectance spectrum, what would result in an improvement of NAA-based optical sensors. By adequately tuning the gold thickness, sharp valleys in the reflectance can be obtained in the near-IR range that can further contribute to a more accurate determination of spectral shifts and a consequent sensitivity improvement. A model based on the effective medium approximation for the NAA layer and for the deposited gold thin film has been proposed click here and shows a good agreement with the experimental measurements. In particular, the model is able to explain the shape of the sharp reflectance valleys in the near-IR for the different gold thicknesses and NAA porosities. This work shows that nanoporous anodic alumina coated with gold is a promising structure for future biosensing applications because of the improved sensitivity in any pore geometry due to the enhancement in the reflectance FI. Specific applications could then benefit from a big surface-to-volume ratio in big porosity

structures to sense biomolecules, whereas for filtering purposes, the pore diameter can be tuned to match the molecule size to be transported through the membrane. Acknowledgements This research was supported Oxalosuccinic acid by the Spanish Ministerio de Economía y Competitividad through the grant number TEC2012-34397 and the Generalitat de Catalunya through the grant number 2009-SGR-549. References 1. Losic D, Simovic S: Self-ordered nanopore and nanotube platforms for drug delivery applications. Expert Opin Drug Deliv 2009, 6:1363–1381. 10.1517/17425240903300857CrossRef 2. Yeom S-H, Kim O-G, Kang B-H, Kim K-J, Yuan H, Kwon D-H, Kim H-R, Kang S-W: Highly sensitive nano-porous lattice biosensor based on localized surface plasmon resonance and interference.